EPILOX 246 SL is a two-component solvent free epoxy coating at a minimum thickness of 2.0mm in a single application. This system consists of a pre-weighted base and hardener component. A slip resistant texture can be provided by the use of one of a range of CHEMIND’s Anti Slip Grains.
EPILOX 246 SL
Two-part, self-levelling solvent free epoxy resin coating
Advantages
- Good chemical resistance & bonding strength
- It has a very low odour due to the nature of solvent free
- Slip resistance – different textures available to suit condition to avoid slipping
- Good abrasion resistance to foot and light vehicular traffic
Technical
Technical and Mechanical Properties
| Density | Part A: 1.28 kg/m3
Part B: 1.09 kg/m3 Mixed A + B : 1.22 kg/m3 |
| Solid content | 100% by weight |
| Compressive strength (BS 6319: part2:1983) | >44 N/mm2 |
| Flexural strength (BS EN 6319: part 3-1990) | >65 N/mm2 |
| Surface hardness (BS EN 13892-6:2002) | >36 N/mm2 |
| Bond strength by pull-off method (BS EN 13892-8:2002) | >2.2 N/mm2 |
| Water absorption (Korstner test) | 0% |
| Abrasion resistance (ASTM D4060-14) CS10 wheel. 1000g load | 57.25 mg weight loss |
| Heat resistance (ASTM D 2485-91:2013) | Up to 200 oC |
| Water vapor transmission (ASTM E96-16) | 0.22g/h/m2 |
Download
